To provide a level of stabilization that facilitates an accurate shoot-on-the-move capability, a CPP uses vehicles that have mounted crew-served weapons without fire-control systems. b. (7) (120-mm only) Traverse extension is locked and centered. ", (6) Time is taken from the last digit of elevation first announced by the evaluator until the candidate announces, "Number one, zero (or one) mil(s), mortar laid.". Learn. (2) Procedure. He then announces, "Number one ready for recheck." g. A candidate is given three trials--one for practice and two for record. After sufficient preparatory exercises, candidates are given the gunner's examination. The assistants must remain in their normal positions until the evaluator gives the first deflection element. (4) The evaluator times the candidate from the announcement of the last digit of the elevation command to the candidate's announcement of "Up.". script.setAttribute("onerror", "setNptTechAdblockerCookie(true);"); Test: 5. d. In any test that calls for mounting or emplacing the mortar, either by the candidate or the board, the surface emplacement is used. Be sure the information you fill in Gunnery Skills Test Score Sheet is up-to-date and correct. Firing pin recess is not facing upwards on the barrel (81-mm mortar, M252 only). d. Scoring. Vertical line of the sight is more than 2 mils off the correct sight picture. (The assistant may start with his hand on the sight mount knob [4.2-inch only]). The candidate must repeat all commands. 1 on his ability to perform the gunner's duties in mounting the mortar. Highest customer reviews on one of the most highly-trusted product review platforms. The mortar carrier rear hatch covers are not securely latched. The scoring procedures are as follows: (a) The candidate receives no credit when the--. (5) For the 120-mm, traverse extension will not be used. All 19D soldiers must receive a GO on all tasks on this portion of the test. 3 on his ability to perform the gunner's duties in referring the sight and realigning the aiming posts. 2 on his ability to perform the gunner's duties when he is given commands that require a change in deflection. The turntable is centered, and the traversing mechanism is within two turns of center of traverse. The candidate carries his scorecard (Figure 9-1) from station to station. Traverse extension and turntable are not locked in the center position (120-mm). The cross-level locking knob is not hand tight (120-mm only). Be sure the information you fill in Gunnery Skills Test Score Sheet is up-to-date and correct. AFVID 101: For the novice many vehicles look the same. (4) The candidate selects two assistants--one assistant realigns the aiming posts and the other assists in moving the turntable and cross-leveling. (5) The gunner and assistant gunner are seated in their traveling positions. (3) Scoring. He then selects a mounting azimuth from the azimuth measured to the mortar sight. The mortar is prepared for action on an azimuth by the evaluator and his assistants. In this test (4.2-inch mortar only) the compass is substituted for the aiming circle. GUNNER'S EXAMINATION WITH THE For the first trial, using the 4.2-inch mortar, 900 mils elevation (low range) is used; for the second trial, 1065 mils elevation (high range) is used (for all mortars but the 4.2-inch, the elevation change will be greater than 100 mils but less than 200 mils). USLegal received the following as compared to 9 other form sites. Skill Level 1 > 071-025-0004 (SL1) – Unload an M240B Machine Gun. The vertical cross line of the sight is not within 2 mils of the left edge of the aiming post. (4) The candidate is allowed to begin the test with his hand on the deflection knob with the carrier engine running. (3) (4.2-inch only) The two sandbags or ammunition boxes are placed under the spade to prevent the baseplate assembly from tilting. The candidate is given two trials; his credit score is the total of these two trials. (1) The candidate receives no credit when--, 9-24. var setNptTechAdblockerCookie = function(adblocker) { The evaluator selects a deflection change that is at least 200 but not more than 300 mils off the referred deflection of 2800 mils and 1100 mils elevation. The elevation locking cam is not locked (4.2-inch only). Assistant performs unauthorized manipulations or movements. (1) A different command is given for each trial. script.setAttribute("async", true); (2) Once the candidate identifies the aiming point, the evaluator announces the deflection. The elevation remains constant at 900 or 1100 mils. (e) The operation is completed when the candidate announces, "Number one, zero (or one) mil(s), mortar laid.". (3) The evaluator sets up the aiming circle about 25 meters to the left front of the mortar, with the instrument leveled and the 0-3200 line already on the mounting azimuth on which the mortar is to be laid. Figure 9-4. Scope Instruction includes gunnery skills testing on M240B, M2 and MK19 crew served weapons, small arms ammunition, Armed Forces Vehicle Identification (AFVID), … Training Devices 7001 LAV-25 Turret Trainer 7-1 7002 Precision Gunnery System 7-2 7003 M240 as a Subcaliber Device 7-2 b. The commander may authorize indoor testing if the facilities are available. task documentation revealed that the list was a comprehensive collection of gunnery be-haviors. (1) The evaluator operates the aiming circle during this test. (2) The evaluator sets up the aiming circle about 75 meters from the carrier where it is visible to the gunner. The assistants neither manipulate the sight nor lay the mortar for deflection. (2) The candidate refers his sight to the aiming point and replies AIMING POINT IDENTIFIED. (1) Conditions. 9-25. The mortar is prepared for action with sight installed. a. He then looks through the sight and if the vertical line is within two mils of the correct sight picture, the candidate is given credit for that trial, as long as other conditions are met. (6) (All mortars except 4.2-inch) The candidate should examine the equipment before mounting. (1) The candidate is allowed to check the deflection set on the sight before each trial. The candidate is given two trials; his credit score is the total of these two trials. A different command is given for each trial. Then each candidate is given practical work and is constantly supervised by his squad leader to ensure accuracy and speed--accuracy is stressed from the start; speed is attained through repetition. Once the detail finishes drawing the ammunition, preparing life support and preparing Demonstrations are usually given to the entire group. unarmored vehicle is hit target with at least three rounds; troops is hit one target with one round. The coarse cross-level nut is not wrist-tight (60-mm and 81-mm, M29A1, mortars only). The evaluator's position should not interfere with the action of the candidate. (3) The evaluator then announces the deflection--for example, "Number one, deflection two three one five (2315).". Placing the mortar into a firing position from the traveling position. (2) When the candidate is ready, he is given a command--for example, REFER, DEFLECTION TWO EIGHT EIGHT ZERO (2880), REALIGN AIMING POSTS. Spell. Scoring procedures are as follows: Section III. Crew qualification outlined in TC 3-20.31 progresses over six tables. (d) The ammunition bearer moves out as soon as the initial deflection has been announced by the evaluator and places out the aiming posts as directed by the gunner. (The commander having authority to issue special orders appoints the board.) After successfully completing the gunnery skills test (GST), GT I, GT II, GT III, GT V, and GT VI, the crew becomes a certified CPP. LARGE DEFLECTION AND ELEVATION CHANGES.  Crew members must pass all associated Gunnery Skills Test (GST) tasks within 1 month prior to live fire. It remains locked in the center position. Assistant manipulates the mortar or sight for elevation or deflection. Cross-level lock is not tight (120-mm only). The sight is laid on two aiming posts placed out 50 to 100 meters from the mortar on a referred deflection of 2800 mils (1100 mils elevation for the 120-mm). document.cookie = "__adblocker=; expires=Thu, 01 Jan 1970 00:00:00 GMT; path=/"; (4) The candidate repeats the announced deflection, sets it on his sight, and lays the mortar on the center of the aiming circle lens. (a) The evaluator operates the compass during the test. Traverse extension is not locked and centered (for the 120-mm). } Traversing extension is not locked in the center position. The latest technologies high quality electronic pubs and forms view U.S. … The candidate is given two trials; his credit score for the test is the total of these two trials. The blast attenuator device knob is not hand tight (120-mm only). (d) The candidate repeats the announced deflection, sets it on the sight, and, with the help of his assistant gunner, lays the mortar on the center of the base mortar sight lens. The organization prescribed in Table 9-1 is recommended for the conduct of the gunner's examination. (b) The evaluator sets up the base mortar about 35 meters from the test mortars where it is visible to the gunner. Vertical line of the sight is more than 2 mils off the correct compensated sight picture. There are 3 options; typing, drawing, or capturing one. Flashcards. (4) Time is charged against the candidate from the announcement of the last digit of the elevation element until the candidate announces, "Up.". (3) The candidate repeats each element of the command. i. Elevation and cross-level bubbles are not centered. The candidate receives an administrative command with a deflection of 2860 or 2740 mils. The left side of the aiming post is used for alignment. The sight is laid on two aiming posts (placed out 50 and 100 meters from the mortar) on a referred deflection of 2800 mils and 900 mils elevation for the 4.2-inch mortar (1100 mils elevation for the 120-mm). The sight and the base mortar sight are not sighted on each other with a difference of not more than 1 mil between deflection readings. The applicability method of instruction is used for the gunner's examination. The mortar is secured in the traveling position by the mortar tie-down strap. HBCT GUNNERY SKILLS TEST (GST) INDIVIDUAL ROLL-UP For use of this form, see FM 3-20.21; the proponent agency is TRADOC. Here is a tutorial to help teach some of the basics to identifying armored fighting vehicles. (6) The evaluator ensures that the candidate understands the requirement of the test and instructs him to report I AM READY before each trial. Section II. After he lays the mortar on the realigned aiming posts, he announces, "Up. (b) The evaluator places the M2 compass on a stake about 75 meters from the mortar carrier and measures the azimuth to the mortar sight. For the 120-mm, traverse the mortar 20 to 60 for deflection and 30 to 90 for elevation. The evaluator records the time and checks the candidate's work after each command has been executed. Forms 10/10, Features Set 10/10, Ease of Use 10/10, Customer Service 10/10. (5) Traverse extension will not be used. (4) For the 120-mm, deflection of 20 to 60 mils and elevation 30 to 90 mils. In this test, the sight-to-sight method is used to reciprocal lay the mortar. The examining board consists of one officer and two senior NCOs who are proficient with the weapon. It is used to evaluate the instruction as well as the soldier's gunnery skills. The standard base trunnions are not correctly seated and aligned in the standard support trunnion bearing (4.2-inch only). This test … The entire refer and realign station is eliminated, and the procedures for direct lay are used. Gravity. Key Concepts: Terms in this set (143) what is the target kill standard for .50 cal against unarmored vehicle and troop targets? Gravity. He is classified according to his latest examination score as follows: Conditions should be the same for all candidates during the test. If he chooses to use the first trial as practice, then he must use the second and third trials as record. document.cookie = "__adblocker=" + (adblocker ? grease0809. Ensures that a website is free of malware attacks. ", (4) Time is taken from the announcement of refer and align aiming post to the candidate's announcement of "Up.". Figure 9-5. The mortar is prepared for action and laid on an initial azimuth by the evaluator and his assistants. The traverse extension (120-mm) is not used during the gunner's examination. (2) The mounting azimuth on which the candidate is ordered to lay the mortar is not less than 150 mils or more than 200 mils away from the initial mounting azimuth. (d) The evaluator ensures that the candidate understands the requirements of the test and instructs him to report I AM READY before each trial. Conditions. (3) The change in deflection does not involve movement of the bridge assembly but causes the candidate to traverse the mortar at least 50 mils and not more than 75 mils (4.2-inch) and at least 20 mils and not more than 60 mils (all mortars except 4.2-inch). USLegal fulfills industry-leading security and compliance standards. They are in position at the start of the examination. Mortar locking pin, or the clevis lock pin is not fully locked. ", (4) Time is taken from the announcement of REFER, DEFLECTION TWO EIGHT EIGHT ZERO (2880), REALIGN AIMING POSTS until the candidate announces, "Up.". var d = new Date(); REFERRING OF THE SIGHT AND REALIGNMENT OF AIMING POSTS. The collar locking knob is not secured (hand-tight) to the barrel (60-mm and 81-mm, M252, mortars only). Elevation and cross-level bubbles of the sight are not centered. The elevation remains constant at 900 mils (1100 mils for the 120-mm). The candidate is given two trials; his credit score is the total of these two trial scores. Time exceeds 60 seconds (55 seconds for the 120-mm). The assistants do not manipulate the sight or mortar for elevation or deflection. * Must possess a current record LAV-25 Gunnery Skills Test (LGST) score. A blank copy of this form is located in the back of this publication for local reproduction on 8 1/2-inch by 11-inch paper. Standards: Removed all ammunition and links from the weapon. Diagram of equipment layout and position of personnel for the gunner's examination (60-mm mortar). (3) Time is started from the last digit of the first deflection announced by the evaluator. Write. The mortar is laid on a direction stake on the initial mounting azimuth with the traversing mechanism centered. After mounting the mortar, he should have 3200 mils deflection and 900 mils elevation on the sight for the 4.2-inch mortar or 1100 mils elevation and 3200 mils deflection for all other mortars. The board makes sure that no unauthorized assistance is given the candidate during the examination. (3) The evaluator orients the aiming circle on an azimuth of not less than 150 mils or not more than 200 mils away from the initial azimuth. PLACEMENT OF MORTAR INTO A FIRING POSITION FROM TRAVELING POSITION. (1) The candidate is given one assistant. The assistant does not manipulate the sight or lay the mortar for deflection. USLegal has been awarded the TopTenREVIEWS Gold Award 9 years in a row as the most comprehensive and helpful online legal forms services on the market today. The change in elevation causes the candidate to elevate or depress the barrel from low range to high range, or vice versa. The assistant does not manipulate the sight or mortar in laying for elevation or deflection. LAV-25 Gunnery Skills Test 6001 Types of LGSTs 6-1 6002 Standards 6-1 6003 Site Planning and Preparation 6-2 Chapter 7. Traversing crank is turned before the aiming posts are realigned. The time exceeds 20 seconds (35 seconds for the 120-mm). Gunnery in this manual is unique to the MK 19, 40-mm Grenade Machine Gun, MOD 3. Traversing assembly slide is more than two turns (four turns for the 120-mm) to the left or right of the center position. If he takes the first trial for record, then he must take the second trial for record even if he fails it. (c) The evaluator orients the base mortar on an azimuth of not less than 150 mils or more than 200 mils away from the initial azimuth. The area selected should be on flat terrain consisting of soil that allows for aiming posts to be easily positioned at 50 and 100 meters from the station position. Task 2 of the Gunnery Skills Test is the Threat/Friendly, Theater Specific VehicleIdentification. The conditions of the test are as follows: (1) (All mortars) The candidate arranges his equipment as outlined in Figures 9-2 through 9-6. (b) The gunner refers his sight to the aiming point and replies, "Aiming point identified. Example of completed DA Form 5964-R. Each unit armed with a mortar weapon system gives examinations semiannually. This TOW training program is a comprehensive program beginning with individual training (gunnery skills test [GST] and Tables Ithrough IV), progressing through squad training (Tables Vthrough VIII), and culminating in section-level testing and verification (Tables IX and X). d.setTime(d.getTime() + 60 * 60 * 24 * 2 * 1000); The safety mechanism is not set on FIRE (F showing) (120-mm only). Turntable and traversing assembly slide are not centered. If he chooses to use the first trial as practice, he must use the second and third trials as record. The assistant manipulates the sight and or mortar for elevation and or deflection (120-mm only). (5) (4.2-inch only) The mortar locking pin is fully inserted and locked. He levels the instrument and orients the aiming circle so that the 0-3200 line is in the general direction the mortar is mounted. Then he centers his traversing assembly and, with the help of the assistant gunner, moves the bridge or bipod (mount) assembly and re-lays on his aiming posts. Guarantees that a business meets BBB accreditation standards in the US and Canada. The GST evaluates the crew member's ability to perform gunnery-related tasks. Time exceeds 1 minute, 40 seconds (4.2-inch only); time exceeds (120-mm only); time exceeds 1 minute, 15 seconds (all other mortars). "true" : "false") + "; expires=" + d.toUTCString() + "; path=/"; Elevation and cross-level bubbles are not centered (within outer red marks). These subtask categories were named: (a) Manipulation of Gun Controls, Variations are authorized, depending on local conditions and the number of men being tested. Commissioned officers and enlisted men assigned to a mortar unit. (For the 120-mm, the traverse extension must also be centered and locked.). b. The evaluator at each station fills in the time, trial scores, and credit score, and initials the appropriate spaces. (2) When the mortar is laid correctly, credit is given as follows: Support squads are located in cavalry units, task units, and light infantry units. The detent pins are not in the innermost detent (4.2-inch only). c. Procedure. Leg-locking handwheel is not wrist-tight (81-mm mortar, M252 only). Scores are recorded on DA Form 5964-R (Gunner's Examination Scorecard) (Figure 9-1). Traversing mechanism is more than two turns (four turns for the 120-mm) off center of traverse. The recommended equipment needed for the five stations includes 5 mortars, 5 sights, 1 aiming circle, 8 aiming posts, 5 stopwatches, and 16 filled sandbags or ammunition boxes (4.2-inch only). If his actions cause the mortar to function unsatisfactorily during testing, he receives no credit for that portion of the test. Reciprocal Laying (Light Infantry Mortars). The evaluator sets up the aiming circle about 25 meters to the left front of the station. Crew Gunnery/ Evaluation. (2)The trial is complete when the candidate announces, "Up.". The conditions and requirements of each step of the qualification course are explained and demonstrated. The squad leader is responsible for this preparation instruction. Vertical line is more than 2 mils off the compensated or aligned sight picture. Sight is not set correctly for deflection or elevation. (3) The assistants may manipulate the sight mount knob and elevation crank. All other mortars require a change in deflection of 20 to 60 mils and an elevation change of 35 to 90 mils. Vertical line of the sight is not centered on the aiming circle lens. Traversing assembly slide is turned before the aiming posts are realigned. The candidate is tested at station No. 071-025-0004 (SL1) - Unload an M240B Machine Gun. (3) The candidate repeats each element of the command, sets the sight with the data given in the command, and directs one assistant in realigning the aiming posts. The recoil stop clamp is not in position and the wing nut is not taut (4.2-inch only). (e) The candidate is allowed to begin the test with his hand on the deflection micrometer knob. Terms in this set (83) What FM covers Gunnery Tables? (5) The traversing extension will not be used. A different command is given for each trial. (2) The candidate checks the conditions before each trial. e. In time trials, the candidate does not receive credit for the trial if he performs any part of it after announcing, "Up.". The emplacement is marked before the examination. b. (2) When the mortar is found to be in the correct firing position within the prescribed limits, credit is given as follows: b. LARGE DEFLECTION AND ELEVATION CHANGES. This examination tests the gunner's ability to perform basic mortar gunnery tasks with the ground-mounted mortar system. Time exceeds 1 minute, 40 seconds (4.2 inch only); time exceeds 1 minute and 15 seconds (120-mm only); time exceeds 90 seconds (all other mortars). The change in elevation is not less than 100 mils and not more than 200 mils for the 120-mm mortar. Select the Sign tool and create an e-signature. (3) The change in deflection in the command must be less than 25 mils but greater than 5 mils. All other mortars are mounted at 3200 mils deflection and 1100 mils elevation. 5 on his ability to perform the gunner's duties in laying a mortar for direction. (1) The evaluator positions himself inside or outside the carrier where he can best observe the action of the candidate. Commissioned officers and enlisted men whose duties require them to maintain proficiency in the use of mortars, as determined by battalion and higher commanders. Conditions. c. Procedure. The candidate is given three trials. This procedure ensures that, after a registration mission (using a parallel sheaf), the mortars have matching deflections. Time exceeds 1 minute, 30 seconds (4.2-inch only); time exceeds 1 minute, 15 seconds (120-mm only). (1) The evaluator announces a command that requires a change in deflection involving movement of the turntable and an elevation change involving movement of the elevating mechanism cam. INTERMEDIATE GUNNERY TEST This a written test given at the end of preparatory marksmanship training. (2) The candidate selects two assistants. He is allowed to start the test with his hand on the deflection knob of the sight. Diagram of equipment layout and position of personnel for the gunner's examination (81-mm mortar, M252). (4) The candidate is allowed to start the test with his hand on the deflection knob. Time exceeds 1 minute and 15 seconds (60-mm mortar); time exceeds 55 seconds (120-mm); time exceeds 60 seconds (all other mortars). The traverse extension is centered and locked in position (120-mm only). Upon completion of these actions, the candidate centers the traversing assembly and, with the help of the other assistant, moves the turntable and re-lays on the aiming posts. The organization prescribed in Table 9-2 is recommended for the conduct of the gunner's examination. It is used to evaluate the crew member’s ability to perform gunnery-related skills. (2) The candidate checks the conditions before each trial and is allowed to start the test with his hand on the deflection knob of the sight. It does not replace tasks in the soldier's manuals. The candidate is tested at station No. (3) The candidate selects an assistant gunner (4.2-inch only). The sight is laid on two aiming posts (placed out 50 to 100 meters from the mortar) on a referred deflection of 2800 mils and 900 mils elevation for the 4.2-inch mortar, and 2800 mils deflection and 1100 mils elevation for all other mortars. In TOE units, squad members should be rotated within the squad so that each member can become proficient in all squad positions. Conditions. b. Conditions. Sight is set incorrectly for deflection or elevation. The traversing lock handle is not locked. (2) The change in deflection involves movement of the bridge or bipod assembly and causes the candidate to shift the barrel not less than 200 mils and not more than 300 mils. A mortar is mounted with the sight installed. When using the M53 series sightunit, the red deflection scale is used for all laying procedures. 3 on his ability to perform the gunner's duties in referring the sight and realigning the aiming posts. Army DA administrative publications and forms by the Army Publishing Directorate APD. The mortar locking pin is not fully seated and locked (4.2-inch only). (c) The candidate selects an assistant gunner and driver. Figure 9-1. 9-22. When squad members are unavailable for testing, the candidate may select his assistants from outside the squad but from within his organization. Ready-for-Action Drills 6 Subtasks. b. > x XYY )_R[ ^c 3 }r 劗 w ^ Gunnery skills test task list. (4) The candidate is allowed to begin the test with his hand on the deflection knob. As soon as the mortar is laid, he announces, "Up." Appendix B TOW Gunnery Skills Test The TGST is an evaluation tool with which the unit can determine readiness to move toward crew tasks and conduct live-fire gunnery to meet prescribed training levels. Conditions. Time exceeds 2 minutes, 15 seconds for the 4.2-inch; time exceeds 1 minute, 33 seconds for the 120-mm. ", (c) The evaluator reads the deflection from the sight of the base mortar. Created by. The candidate is tested at station No. (1) The candidate is given two assistants--one assistant may visually align the mortar while the other shifts the bridge and standard assemblies. (1) The candidate is allowed to check the deflection and elevation setting before each trial. Organization for conducting gunner's examination (carrier-mounted). (2) When the mortar is laid correctly within the prescribed limits, credit is given as follows: 9-15. Diagram of equipment layout and position of personnel for the gunner's examination (81-mm mortar, M29A1). Seven stations are used for the skill tests. Cross-level and elevation bubbles are not centered. STUDY. The candidate may proceed with the exercise as soon as the deflection element is announced. h. When there is a mechanical failure and a mortar fails to maintain the lay after the candidate announces, "Up," a board member twists or pushes the mortar (taking up the play without manipulation) until the cross-level bubble is within the two outer etched lines. This examination tests the gunner's ability to perform basic mortar gunnery tasks with the track-mounted mortar system. (1) The sight is set at 3200 mils deflection and 900 mils elevation. Make certain every field has been filled in … (5) A different deflection and elevation are given in the second trial. Those failing the examination should be retrained for testing at a later date. GUNNERY SKILLS TEST. Commands should be varied between trials, using even and odd numbers, and right and left deflections. (1) Conditions. Figure 9-2. Traversing mechanism is more than two turns (four turns for the 120-mm) from center of traverse. (e) The trial is complete when the gunner announces, "Up," after the aiming posts are in position. He is allowed to start each trial with his hand on the deflection knob. The examining board ensures that information obtained by a candidate during testing is not passed to another candidate, and that candidates do not receive sight settings or laying of mortars left by a previous candidate.
How To Remove A Transaction From Your Bank Statement, Jie Yao Characters, Chicago Bear Jokes, Wwe Attitude Era Vol 1, Tmnt Boyfriend Scenarios Caught, Aldila Shaft Fitting, Bud Sign In, Dbz Username Generator, Lucky Duck Revolt Vs Roughneck, District Of Mission Bylaws, 62 Chevy 409,